Windsor CBE20 Betriebsanleitung PDF herunterladen (Seite 10)

Operations

How This Machine Works

The Chariot is a battery powered, self propelled, hard

floor burnisher intended for commercial use. The

appliance spins a high-speed burnishing pad in contact

with the floor surface to produce a high luster shine.

The machines primary systems are the burnishing

system, the dust control system and the operator

control system.

The function of the burnishing system is to spin a high-

speed burnishing pad in contact with a floor surface

that has had a burnishable floor finish applied. The

burnishing pad can be lowered to the floor and raised

by the operator, the operator can also control the pad

pressure by use of the pressure switch. The burnishing

pad will spin only when the machine is directed to move

by the operator.

The function of the dust control system is to collect the

dust that is created during the burnishing process. It is

normal for a portion of the floor finish to be removed in

the form of dust during the process. While burnishing,

air movement is created within the burnishing head by

the spinning pad. The dust that is also created is

entrained in the air stream and transported to a filter

bag where it is collected and separated from the air

stream. The filter bag can be easily changed without

releasing the collected dust

The function of the operator control system is to control

the direction and speed of the machine. The directional

control system consists of the direction control switch,

throttle pedal, speed control switch, drive reset switch,

emergency stop/brake switch, steering wheel, propel

controller and drive wheel.The directional control

switch signals forward or reverse direction. The

controller interprets signals from the throttle pedal to

command the drive wheel to propel or slow the

machine. The drive reset switch is to make sure the

operator is on platform before machine will propel. The

steering wheel points the drive wheel in the direction

desired by the operator. The parking brake automati-

cally engages when the operator steps off the platform.

The emergency stop/brake can be used to hold the

machine on slopes.

86345050 Chariot Burnisher

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare

Windsor CBE20 Betriebsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Scrubber Windsor CBE20