Windsor CBE20 Betriebsanleitung PDF herunterladen (Seite 27)

Maintenance

Pad Driver Replacement

Turn key switch on to lower deck down. Use needle

nose vise grips to clamp together spring retainer bars

between spring.

Remove the four bolts holding deck assembly onto

frame. Two bolts on each side.

Label and remove wires coming off of motor. Discon-

nect by unplugging motor wire harness from machine

wire harness. Take note cable tie locations.

Slide deck out from under machine and turn deck

assembly over on to motor. Remove pad lock and pad.

Attach metal ring (86082070 - PRV NO. 629000) using

same screws that held pad lock keeper. Screw in

spacer (862454470 - PRV NO. 739000) into motor

shaft.

86345050 Chariot Burnisher

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 105 106

Keine Kommentare

Windsor CBE20 Betriebsanleitung Seite 27